Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

restrictions of Miller's theorem

Status
Not open for further replies.
D

deepa

Full Member level 2
Joined
Jul 3, 2005
Messages
127
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,298
Activity points
2,226
Wat r the restrictions of the miller's theorem usage.Can it be used in any feedback amplfiers to find out the Vout/Vin expression..will the expression derived with the miller capacitances in place give the same result without implementing the miller effect and findindg out the transfer function
 

Applying Miller's theorem always gives you an equivalent circuit.
You never have problems with this circuit if you do not change the excitation source.
If you do change the excitation source then you have to reapply Miller's theorem for the new conditions and you will get a different equivalent circuit.

Just two examples where Miller theorem is used not correctly.
---
1. You excite the circuit at its input with a source Vs and get an equivalent circuit.
2. You then use this equivalent circuit to find Ro=Vt/It by connecting a
test source Vt to the circuit output and suppressing Vs.
---
1. You excite the circuit at its input with a source Vs and get an equivalent circuit.
2. You then use this equivalent circuit to find return ratio.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top