Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Measuring the capacitance

Status
Not open for further replies.
E

electronicman

Member level 3
Joined
Nov 7, 2004
Messages
60
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
476
Hi,I am designing a capacitor using the microstrip how can I measure my capacitance in the sumulation for Momentum ADS layout design.
I have perfect matching port terminals 50 Ohm and interdigital capacitor.

thanks
 

Why don't you try making some circuit that will help you measure the capacitance, by measuring other thing. It is not a hard thing to do at all, especially if you have oscilloscope...

Johnny
 

I maybe missing what you are asking, but why not look at Z12 or Y12. At low frequencies, these values will be dominated by the capacitance. So Y12 = 1/Z12 = j*w*C.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top