How to create .s2p file from device data in pdf?

I hv data of a device in pdf file. I want to create .s2p file of the device so that i can simulate with RFSIM99.

.s2p file

check this link
it is the touchstone file format standrad
i have learned to create my file from it

www.vhdl.org/pub/ibis/connector/touchstone_spec11.pdf

khouly

s2p files

got it. I opened one .s2p file with notepad. I admitted new parameters & resaved in notepad. Then changed the file extention to .s2p. The appcad recognises the file but RFSIM99 doesn't recognise it. The RFSIM99 recognise the original file but not created by me. The appcad recognises both the files.
How to solve this problem?

what is s2p file

Archive your s2p file with WinRAR and post it here so we can take a look.

file s2p

Here r two files. one with 7 ma is created by me.

how to create s2p file

Hello Jaya000,


These attched modified new files (*_new.s2p) should work...



---manju---

how to create touchstone file

Yes it is working now. Tell me what should i do for other files? I also want to modify some .s2p files.

viewing s2p files

Hello Jaya,

Nothing great I did, just removed the Tab/spacing on all the lines i.e
0.10 0.759 -43 16.992 148 0.004 54 0.896 -18
and the use one tab space between the dat points
it is thestandrad touchstone file format description....

Original file
! NEC Compound Semiconductor Devices Ltd.
! 20. August 2002
! NE85639E/2SC4093
! NPN Silicon Transistor
! Vce = 10 V Ic = 20 mA
# GHz S MA R 50
! f S11 S21 S12 S22
! GHz MAG ANG MAG ANG MAG ANG MAG ANG
0.10 0.759 -43 16.992 148 0.004 54 0.896 -18
0.50 0.478 -138 6.930 98 0.051 51 0.496 -29
1.00 0.459 178 3.728 75 0.081 57 0.398 -31
1.50 0.490 155 2.557 61 0.119 61 0.353 -39
2.00 0.512 139 1.951 49 0.160 63 0.326 -47

Modified file
! NEC Compound Semiconductor Devices Ltd.
! 20. August 2002
! NE85639E/2SC4093
! NPN Silicon Transistor
! Vce = 10 V Ic = 20 mA
# GHz S MA R 50
! f S11 S21 S12 S22
! GHz MAG ANG MAG ANG MAG ANG MAG ANG
0.10 0.759 -43 16.992 148 0.004 54 0.896 -18
0.50 0.478 -138 6.930 98 0.051 51 0.496 -29
1.00 0.459 178 3.728 75 0.081 57 0.398 -31
1.50 0.490 155 2.557 61 0.119 61 0.353 -39
2.00 0.512 139 1.951 49 0.160 63 0.326 -47

If you still have the problem just send all the files to me...I will help in fixing them...


---manju---

s2p rfsim99

I will try to create as per ur guideline. But which software u used for this?

make s2p files

Hello Jaya,

No Software used for this purpose...
I use AWR Microwave Office & Sonnet EM Simulators for Circuit Design & Analysis...



---manju---