Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

remote control via main line {220V}

Status
Not open for further replies.
H

hassan1980

Full Member level 4
Joined
Jan 14, 2005
Messages
204
Helped
9
Reputation
18
Reaction score
6
Trophy points
1,298
Activity points
1,340
Hi, there

I made an encoder and decoder circuits via RF Modules with one output {one Relay} then I want to control via main line {220v}.

How can I interface with main line (220v}.

I am waiting your replies
 

discussed numerous times here. Search forum "X10" and "PLC modem" terms .
 

    H

    hassan1980

    Points: 2
    Helpful Answer Positive Rating
hey u can use a small transformer to transmit data through 220v line....
try google search....if i get this lost document i ll upload for sure....
 

hassan1980 said:
Hi, there

I made an encoder and decoder circuits via RF Modules with one output {one Relay} then I want to control via main line {220v}.

How can I interface with main line (220v}.

I am waiting your replies
Click to expand...
go here: **broken link removed**
 
Last edited by a moderator:

    H

    hassan1980

    Points: 2
    Helpful Answer Positive Rating
electronicus said:
hassan1980 said:
Hi, there

I made an encoder and decoder circuits via RF Modules with one output {one Relay} then I want to control via main line {220v}.

How can I interface with main line (220v}.

I am waiting your replies
Click to expand...
go here: **broken link removed**
Click to expand...

Can you help me?

I have a question relating to this topic !

Hi, there

I admired with your design about Télécommande secteur then I have a question can I use PT2262 encoder in the transmitter circuit instead of 12C508 and PT2272 decoder instead of 12C508 in the reciever circuit? then please let me know the modification !!!

I appreciate your efforts

I am waiting your reply
 
Last edited by a moderator:

hassan1980 said:
Hi, there

I made an encoder and decoder circuits via RF Modules with one output {one Relay} then I want to control via main line {220v}.

How can I interface with main line (220v}.

I am waiting your replies
Click to expand...

Use lonworks design!
 

kenny_zhou said:
hassan1980 said:
Hi, there

I made an encoder and decoder circuits via RF Modules with one output {one Relay} then I want to control via main line {220v}.

How can I interface with main line (220v}.

I am waiting your replies
Click to expand...

Use lonworks design!
Click to expand...

What do you mean?
 

There is an app note from Microchip for a 16F877 to X10 controller. The source code and schematic is on Microchips site under the App Notes section. Just look for X10
 

    H

    hassan1980

    Points: 2
    Helpful Answer Positive Rating
kenny_zhou said:
hassan1980 said:
Hi, there

I made an encoder and decoder circuits via RF Modules with one output {one Relay} then I want to control via main line {220v}.

How can I interface with main line (220v}.

I am waiting your replies
Click to expand...

Use lonworks design!
Click to expand...

have a look!click the wed link!
https://www.echelon.com/
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top