Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

RCXT... without netlist

Status
Not open for further replies.

thefreshman

Newbie level 4
Joined
Jan 18, 2006
Messages
6
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,330
Can I do RC-extraction without netlist?

I have gds file from Astro.
but I don't have netlist file of that logic.
That logic made from verilog source synthesized by Desgin complier.

Can I get extraction result?
 

thefreshman said:
Can I do RC-extraction without netlist?

I have gds file from Astro.
but I don't have netlist file of that logic.
That logic made from verilog source synthesized by Desgin complier.

Can I get extraction result?

I think it can't get result.
You need netlist to run LVS(hercules, calibre) software.
The LVS software will give RC extraction tool some information about device and net .....
You will depend LVS tool result to run rc extraction.

Best Regares,
Chyau
 

if you have Astro data of your design, you can get extraction result.
if not, lvs need to be done first (hercules,calibre,assura);
br
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top