Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Spartan-3E Starter Kit

Status
Not open for further replies.

sraiderk

Member level 1
Joined
Mar 9, 2005
Messages
39
Helped
11
Reputation
22
Reaction score
1
Trophy points
1,288
Activity points
1,591
Hi,
I want to start FPGA with the following boards.
Spartan-3E Starter Kit (HW-SPAR3E-SK-US) Xilinx Development Boards
With this board, Can I see status of code in fpga. For example, I use the counter in my code . Count pulse coming from buton. Can I see the count value using this board and software. in other words, can I need some additional equipment for my REQUEST?
 

u need chipscope which is provided with the board but an evaluation copy of 30 days only.
 

    sraiderk

    Points: 2
    Helpful Answer Positive Rating
Either to use Chipsope or you can output some internal signals to the FPGA pads then watch them using a Logic Analyzer.
 

    sraiderk

    Points: 2
    Helpful Answer Positive Rating
chipscope is a gud tool for these types of evaluations....u can find a free evaluation version from xilinx website......and if lucky from a torrent.....try searching for it on google....
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top