Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Looking for Slave I2C Source Code

Status
Not open for further replies.
qmriso

qmriso

Member level 5
Joined
Nov 30, 2006
Messages
80
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Activity points
1,879
i2c slave source

I'm using PIC12F510 for the simple control in power supply (I do not need too many I/Os). However, there is I2C required in this design as it's receiving I2C command from the other end. But, F510 does not have I2C.

I need the I2C slave source code to kick start the design. I could only find master I2C source code available. Anyone could share the source code for the slave I2C source code?

Many thanks!
 

pic12f510 source code

Hope this helps!
http://forum.microchip.com/tm.aspx?m=204630
zuisti



qmriso said:
I'm using PIC12F510 for the simple control in power supply (I do not need too many I/Os). However, there is I2C required in this design as it's receiving I2C command from the other end. But, F510 does not have I2C.

I need the I2C slave source code to kick start the design. I could only find master I2C source code available. Anyone could share the source code for the slave I2C source code?

Many thanks!
Click to expand...
 

i2c source code

master is easy,but slave is diffcult.you can use hardware mcu
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top