Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Antenna design in Microstripes 7.0

Status
Not open for further replies.
krishna410

krishna410

Member level 3
Joined
Sep 3, 2006
Messages
60
Helped
7
Reputation
14
Reaction score
5
Trophy points
1,288
Activity points
1,605
microstripes 7.0

Hi,
Its a bit easy task to design antenna structures in Microstripes 7.0. the ease of meshing and time it takes to simulate is less compared to HFSS.
But, the antenna design is effective only if the structure is not complex.
 

can u give more info about microstripes7.0 and if possible send me the s/w
 

hi,
its not for free. but can be get from Flomerics' company.
visit www.flomerics.com for further details.
thnk u

Added after 1 minutes:

I worked on this microstripes 7.0 for designing microstrip antennas...its really awesome.. n moreover it simulates in less time than HFSS9.0
 

hi,

HFSS is a good solution but MICROSTRIPES has an unknown potential.
It approach with TLM (Time domain) really make the difference for spped and accuracy (I like their meshing approach too, pretty smart !!!)

invite you to try it vs HFSS

AW
 

Ya HFSS is accurate if u know the settings and do the meshing
but if u have a simple design like a microstrip antenna for WLAN or Wi-Fi as the structure is simple u can opt microstripes as it allows simple meshing..where as HFSS auto meshes the simple structure uniformly and because of that u may find difference in the center freq and bandwidth
 

Is Microstripes 7 can be used to simulate phased array microstrip antenna? I interested for using this software. Can you tell me anything about it? If you have reference manual, user's guide, or tips and tricks, would you share it to me? Thank you.
 

microstripes might be relatively faster than HFSS at certain types of design, but is it necessarily as accurate too?? i'v used only HFSS so i wanted to know..

i really think that if ya consider the big picture, nothing beats HFSS..

regards,
wiztronix
 

I too agree HFSS is unbeatable... but when u simulate a simple structured antennas or planar antennas .. Microstripes 7.0 allows faster simulating time with compromise of shift in the center frequency.

u can try this s/w at <<www.flomerics.com>> and sample tutorials.

thank u
 

Microstripes give more flexibility and more user friendly to user after it al depends on user how he design no doubt due to the use of TLM solver it is fast and accurate ..i had compare lot of hardware result with it ..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top