Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

A problem with my wavetek DM27XT multimeter

Status
Not open for further replies.
M

mabauti

Member level 4
Joined
Oct 24, 2006
Messages
72
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,288
Activity points
1,699
wavetek dm27xt

Unfortunately I forgot to remove the 9V battery by 6 months (the battery contacts got oxidized ) and now my multimeter keeps buzzing always.

any idea about how to solve this problem?
 

dm27xt

The escaped gases from the LEAKED battery have put some short circuit on the COMPONENT's CONTACTS. Try removing the display and WASH the PCB with warm water and soap. Dry it after washing/cleaning with ELECTRIC AIR BLOWER for about 10~12 minutes. Hope will help you get back the proper functions. Good Luck :|
 

wavetek multimeters

Thank you Raza. I'll try that and I'll post the result 8)
 

Hi all,

I have the same problem and would like to know if mabauti solved his problem and how ?

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top