Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Mesh3d Error in HFSS.. Help!!!

Status
Not open for further replies.
S

sharly

Newbie level 1
Joined
Nov 8, 2006
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,292
hfss temp file

Can anyone tell me what could be causing this error message:

Initial mesh, process mesh3d:Error while opening or writing the mesh files.
Simulation completed with execution error on server:Local Machine.

The model consists in a probe feed Patch antenna.

Thanks
 

hfss simulation compeleted execution error

Try uniting the center pin and your metal layer and see if it works. If your structure works in this case, it may a be geometry issue. But you can simulate with the center pin and the metal layer united.

Ananth.
 

error retrieving local file +hfss

sharly said:
Can anyone tell me what could be causing this error message:

Initial mesh, process mesh3d:Error while opening or writing the mesh files.
Simulation completed with execution error on server:Local Machine.
Click to expand...

try to check the HFSS project and temporary files paths. Try to rename it in a simple manner.
Sometimes white space and national characters could cause such a problem.
 

hfss simulation completed with execution error

navuho said:
try to check the HFSS project and temporary files paths. Try to rename it in a simple manner.
Sometimes white space and national characters could cause such a problem.

i am sorry ,does what your said can cause the error, are you sure of that ?
 

levin_zhang said:
navuho said:
does what your said can cause the error, are you sure of that ?
Click to expand...
Yes, very often programs can't store files in a folder with unicode pathname.
It's requires correct code writing and use a libraries that support unicode.
I'm not sure about HFSS but it could be...
 

check also that your temporary drive is not full

Also, such problems sometimes appear due to some problems in the license server, may be you need to re-install HFSS
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top