Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to view a contour plot on a chosen plane in HFSS?

Status
Not open for further replies.

zappa

Newbie level 6
Joined
Sep 7, 2006
Messages
14
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,357
Slice view in HFSS

I simulated wave propagation in a rectangular waveguide in HFSS. For postprocessing, I would like to know how to get view of a contour (or vector) plot on a chosen plane in the waveguide. I just want to see the vector plot on a plane inside the waveguide and not inside the whole waveguide. Thanks.
 

Re: Slice view in HFSS

I was able to figure this out. I drew a plane in the model and then plotted the contour. This plots the contour only in the plane that I drew.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top