Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Temperature sensor is required

Status
Not open for further replies.
hameeds01

hameeds01

Advanced Member level 2
Joined
Aug 23, 2005
Messages
599
Helped
75
Reputation
156
Reaction score
41
Trophy points
1,308
Location
Islamabad Pakistan
Activity points
4,540
qm1283 thermocouple

I need an inexpensive “temp sensor“ temp range from 1C to 200C
Tell me the part no.
Temperature accuracy is not required too much 5% tolerance is acceptable
 

Try wireless Thermometer using infrared. The sensor from Melexis, The part is MLX..... (sorry i forgot the number).use google to search with keyword "MELEXIS"
Regards
ELITS
 

If the maximum temperature is below 155°C then the LM35 would be a good choice **broken link removed** ..
If you need full range (up to 200°) an EL-CHEAPO thermocouple - something lik K-Type QM1283 from Jaycar **broken link removed** , or NTC thermistors, for example the DKF103B10: http://www.mouser.com/search/productdetail.aspx?R=DKF103B10virtualkey52710000 .. will do the job ..

Regards,
IanP
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top