Looking for a reliable color LCD which small and cheap

i don't know where to put this question. you quide me plz.
i have been working with the monochrome Lcd of 3310 for quite a while now. it's easy to work with, it's handy, most important of all, it's very small and very cheap and it operates on voltages lower than 3 volts and it's very easy to interface with a microcontroller.

the question is:
and color LCd with this charectersitics?

thanks.

s6b33bc lcd

and color LCD with this charectersitics?

Click to expand...

Have an 1.8" 65k LCD with Samsung S6B33BC controller:

CSTN Display mode
Voltage: 3.0-3.3V, w/ built-in LCD voltage generator
White LED backlight
8-bit parallel mode
1/162 duty, 1/5 bias
LCD module size: 33.54(W) x 45(H) x 1.65(T)
Viewing area: 30.54(w) x 36.04(h)
effective display area: 27.252(w) x 34.068(h)
matrix: 128*RGB*160
dot size: 0.201(BGR)(W) x 0.201(h)

Display driver in C18 released. Available with bare unit or with PCB board, LCD backlight driver circuit. Development board with 18LF4550 with USB Mass Storage available.


John Leung
www.TechToys.com.hk

Re: color Lcd

The Acrobat reader requires Korean fonts to open the above pdf file.

Re: color Lcd

Just follow acrobat download for Korean fonts will be alright. However, 99% of the application note in English, actually.

John

color Lcd

Color LCD is usually used in cell phone
as I know , manufactures offent use mirocontroller
may be
I don't have much experence of using color LCD
can any one help me ??
thanks for your advice

Re: color Lcd

behranghm said:

i don't know where to put this question. you quide me plz.
i have been working with the monochrome Lcd of 3310 for quite a while now. it's easy to work with, it's handy, most important of all, it's very small and very cheap and it operates on voltages lower than 3 volts and it's very easy to interface with a microcontroller.

the question is:
and color LCd with this charectersitics?

thanks.

Click to expand...

Check this out:

Color LCD 128x128 Nokia Knock-Off

https://www.sparkfun.com/commerce/product_info.php?products_id=569

Price: $19.95

Re: color Lcd

I can vouch for the above LCD.

I bought the LCD off ebay (not sparkfun) but after emailing them I was told that it is exactly the same LCD, with the same controller chip.

Also, sparkfun do 'carrier' boards, very handy, just plug in your LCD and you have all the pins you need available on a 0.1" standard pitch header. I'm not advertising here, but its a great and cheap way to get a small colour TFT into a project. In fact, I'm just about to order some more. Its TFT 128x128, which, when setup for full colour (65k?) looks incredible.

However, you mentioned a '3310 lcd', the closest colour equiv of that would be the LCD from a 3510i. Apparently it can display photo's, but its resolution is not quite as good as the one from sparkfun, however, this is easily interfaced with SPI (like most nokia lcds). The 3510i lcd requires an external backlight, whereas the one form sparkfun has it built it (and the carrier board steps up the voltage for it). However, making a backlight wouldn't be hard, if you buy the LCD from ebay, it'll come with the fascia for the hpone, which has the lightguide for the backlight attached. A few SMT white LED's would do nicely (again, done it myself).

It seems in the past year of so, the price of 1-2" colour LCD's has dropped, so get em now

BuriedCode.

Re: color Lcd

HI all,

I also don't know where to put this question. you quide me plz.
i want to work with color graphic lcd but these mobile lcds are very small. My questions is is there any Large lcd any size from 5" to 12" which can be easily interface with microcontrollers for graphic displays.

thanks.