---
+ Post New Thread
Results 1 to 8 of 8
  1. #1
    Junior Member level 3
    Points: 1,339, Level: 8

    Join Date
    Apr 2006
    Posts
    31
    Helped
    0 / 0
    Points
    1,339
    Level
    8

    hfss equation based surface

    Could anybody know it?


    Thx

    •   Alt15th August 2006, 02:26

      advertising

        
       

  2. #2
    Junior Member level 3
    Points: 1,613, Level: 9

    Join Date
    Dec 2005
    Posts
    25
    Helped
    2 / 2
    Points
    1,613
    Level
    9

    equation based surface hfss

    Salam

    I have used the HFSS, though not much. Still I am learning about it. According to my experience you can not draw the triangle it self. But if you want to make some conical shape that is possible. As in the case of horn antenna just it is matter of conecting the surfaces.

    Regards
    Asim



  3. #3
    Advanced Member level 1
    Points: 4,907, Level: 16

    Join Date
    Jul 2005
    Posts
    452
    Helped
    78 / 78
    Points
    4,907
    Level
    16

    how to draw trapezoid in hfss

    just go >draw>line and draw a triangle formed
    by three lines but make sure you close the
    surface. If the surface is not cover go to
    >3Dmodeler>surface>cover faces....



    •   Alt18th August 2006, 16:20

      advertising

        
       

  4. #4
    Member level 2
    Points: 1,482, Level: 8

    Join Date
    Aug 2006
    Posts
    43
    Helped
    3 / 3
    Points
    1,482
    Level
    8

    triangle hfss

    you can also use equation to draw a triangle.

    Draw-> equation based surface

    or
    Draw-> equation based curves.

    Based on my view of points, the latter is more accurate than the first.



  5. #5
    Full Member level 5
    Points: 2,939, Level: 12

    Join Date
    Jul 2004
    Posts
    250
    Helped
    26 / 26
    Points
    2,939
    Level
    12

    draw triangle in hfss

    its simple u can use coordinate entry method and draw triangle and then fill the enclosed area



  6. #6
    Advanced Member level 1
    Points: 3,555, Level: 14

    Join Date
    Aug 2001
    Posts
    414
    Helped
    24 / 24
    Points
    3,555
    Level
    14

    hfss draw triangle

    double click after you have drawn 3 points and 2 lien segments.



  7. #7
    Newbie level 5
    Points: 1,338, Level: 8

    Join Date
    Feb 2007
    Posts
    10
    Helped
    4 / 4
    Points
    1,338
    Level
    8

    formula to draw triangle

    Use Draw line to form trangle or any other geometry in 2D. Then Select the object, copy it and paste to get a duplicate. Now use move to position for the desired thickness. Then select the two oblects (Control + click), from the menu select 3D Modeller > Surface > connect to get the 3D model.


    2 members found this post helpful.

  8. #8
    Newbie level 3
    Points: 399, Level: 4

    Join Date
    Oct 2010
    Location
    Pilani, Rajasthan
    Posts
    4
    Helped
    0 / 0
    Points
    399
    Level
    4

    Re: formula to draw triangle

    thanx, its good stuff



+ Post New Thread
Please login