Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

system to translate the files from cadence allegro to protel

Status
Not open for further replies.
F

FANT

Advanced Member level 1
Joined
Feb 27, 2002
Messages
418
Helped
52
Reputation
104
Reaction score
37
Trophy points
1,308
Location
Italy
Activity points
3,689
C*A*D*E*N*C*E

Do anybody knows any system to translate the files from cadence allegro ( probably release 12 ) to protel ?

Any help is very appreciated.

Thanks in advance

Mandi
 

try camad pcb transtor
 

There is no way to convert schematics.

PCBs can be partially converted by C@MC@D, but you have to extract the @llegro file using a utility included with @llegro. Even then, split planes, polygons, etc won't be carried over into the Pr0tel board.

The short answer is that you can't make the conversion satisfactorily. I spent a lot of time looking for a good solution - I ended up redoing the board from scratch in Pr0tel.
 

allegro is the tool for schematic??????!!!!!!!??????

in fact concept is schematic tool for allegro,and you can tan it to orcad dsn with e-studio(www.estudio.com).
so....prorel can covert orcad.........
 

in fact concept is schematic tool for @llegro,and you can tan it to orcad dsn with e-studio(www.estudio.com).
so....prorel can covert orcad..........
Click to expand...

I know that C0ncept is the schematic tool - I was trying to give him a complete answer.

As for converting to 0rcad DSN and then to Pr0tel - try it yourself, and you will find that many of the components don't show up, some of the busses will not translate, etc. I have many years of experience, and I have yet to be able to get a decent translation from Allegr0/C0ncept to Pr0tel.
 

LONG said:
allegro is the tool for schematic??????!!!!!!!??????

in fact concept is schematic tool for allegro,and you can tan it to orcad dsn with e-studio(www.estudio.com).
so....prorel can covert orcad.........
Click to expand...

Wrong link for E-Studio. Here is the correct link: **broken link removed**
 

is the conversion can be effecitve?
or any chance in the unexpected output, i mean error.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top