Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Square to Sine Wave Generator

Status
Not open for further replies.
D

desperado0729

Newbie level 6
Joined
May 27, 2006
Messages
12
Helped
5
Reputation
10
Reaction score
2
Trophy points
1,283
Activity points
1,348
Hi all,
I am making a 24MHz sine generator based on analog method.
Plz give me some instructions~
Thanks~
 

If you make a square wave generator and intend to covert the output signal to a sine wave, and the frequency is fixed, then you can consider a low-pass filter (or a 24MHz band-pass filter) ..

Here:
**broken link removed**
you will find a description of a square-wave-generator followed by a 2-pole low-pass filter .. see picture .. and the resultant output wave is "almost" sinewave ..

Regards,
IanP
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top