Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to set font on Epson Dot Matrix printer using micro??

Status
Not open for further replies.
E

ex4

Full Member level 2
Joined
Dec 28, 2004
Messages
120
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,298
Location
Jakarta, Indonesia
Activity points
958
epson dot matrix fonts

ANybody can give me the command to set font size and type of an Epson dot matrix printer?? I need it to complete my printer interfacing using avr
thanks
 

how to set fonts in dot matrix

As i know Epson dot matrix printer using ESC/P command to access it. Here is some example. For how to access it, search in beyond logic about printer port. The algorithm is about the same.

Best regards
 

epson set font size

The July 2001 edition of Everyday Practical Electronics
had a PIC-to-Epson printer project/article. Good stuff.
 

best ms font for epson dot matrix

hello this is simple
u just download ESC/P command sequence for EPSON printer from their site, and u will find commands for setting fonts, and many other things.
Sent those commmands and u r job will be done.

But ESC/P commands are particular to printer, so get commands patricular to which u r working.

-- Babesh
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top