Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Hardware design of dual band polygonal patch antenna

Status
Not open for further replies.
R

ranggi_raj

Newbie level 3
Joined
Jul 7, 2006
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,307
hi
i am currently doing a project of the design of a dual band polygonal patch antenna for GSM and UMTS.I have finished designing the antenna with ansoft designer program.Now i have to build the microstrip antenna which i have simulated.Can any one please help me in the hardware designiing of the microstrip antenna..I am using coaxial feeding method.I have to design and fabricate the antenna.I would like to know how does the feeding line will be connected to the antenna and how to combine the ground part,substrate and the patch together.I would really appriciate if anyone would help me since i am really in a rush of time.tq
 

Hi, probably you can export your design file to gerber file for pcb fabrication purpose.

Usually, patch antenna design will be on the top side of PCB substrate while your ground plane is on the other side.

You can refer to Balanis book ;)
 

    R

    ranggi_raj

    Points: 2
    Helpful Answer Positive Rating
but how should i attach this three parts together and any idea about the probe feeding?and can u explain more what u mean by gerber file? tq soo much

Added after 56 minutes:

Please do send me any articles/ thesis regarding polygonal patch antenna
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top