---
+ Post New Thread
Page 1 of 2 12 LastLast
Results 1 to 20 of 21
  1. #1
    Newbie level 2
    Points: 1,491, Level: 8

    Join Date
    Oct 2004
    Posts
    2
    Helped
    0 / 0
    Points
    1,491
    Level
    8

    failed to open the tcp port number in the license

    When I start up license daemon with lmgrd,
    I've got error message like as

    " Failed to open the TCP port number in the license. "

    Lmgrd and vendor daemon is not runing at same time.

    I assume that this is kind of OS problem, I use RHEL 3

    have any Ideas?



    root@linux01:/boot> cat /home/proj/rfbeam/stm_lic/v10-lic.log
    14:54:13 (lmgrd) -----------------------------------------------
    14:54:13 (lmgrd) Please Note:
    14:54:13 (lmgrd)
    14:54:13 (lmgrd) This log is intended for debug purposes only.
    14:54:13 (lmgrd) In order to capture accurate license
    14:54:13 (lmgrd) usage data into an organized repository,
    14:54:13 (lmgrd) please enable report logging. Use Macrovision's
    14:54:13 (lmgrd) software license administration solution,
    14:54:13 (lmgrd) FLEXnet Manager, to readily gain visibility
    14:54:13 (lmgrd) into license usage data and to create
    14:54:13 (lmgrd) insightful reports on critical information like
    14:54:13 (lmgrd) license availability and usage. FLEXnet Manager
    14:54:13 (lmgrd) can be fully automated to run these reports on
    14:54:13 (lmgrd) schedule and can be used to track license
    14:54:13 (lmgrd) servers and usage across a heterogeneous
    14:54:13 (lmgrd) network of servers including Windows NT, Linux
    14:54:13 (lmgrd) and UNIX. Contact Macrovision at
    14:54:13 (lmgrd) www.macrovision.com for more details on how to
    14:54:13 (lmgrd) obtain an evaluation copy of FLEXnet Manager
    14:54:13 (lmgrd) for your enterprise.
    14:54:13 (lmgrd)
    14:54:13 (lmgrd) -----------------------------------------------
    14:54:13 (lmgrd)
    14:54:13 (lmgrd)
    14:54:13 (lmgrd) The license server manager (lmgrd) running as root:
    14:54:13 (lmgrd) This is a potential security problem
    14:54:13 (lmgrd) and is not recommended.
    14:54:13 (lmgrd) Failed to open the TCP port number in the license.

    Added after 2 hours 28 minutes:

    solve the problem!

    LMGRD and Verdor Daemon mismatched! that's why it doesn't work!

    I edited LMGRD from V10 to V9.x and then It works fine.

    •   Alt30th June 2006, 11:08

      advertising

        
       

  2. #2
    Newbie level 2
    Points: 1,286, Level: 8

    Join Date
    Jul 2006
    Posts
    2
    Helped
    0 / 0
    Points
    1,286
    Level
    8

    failed to open tcp port number in the license

    Maybe you need set correct port number and insert statement "USE_SERVER" in you license file.



  3. #3
    Newbie level 1
    Points: 1,741, Level: 9

    Join Date
    May 2003
    Posts
    1
    Helped
    0 / 0
    Points
    1,741
    Level
    9

    flexlm tcp port

    I still meet the problem.
    Can anyone help me



  4. #4
    Full Member level 1
    Points: 2,111, Level: 10
    cougar168's Avatar
    Join Date
    May 2005
    Location
    Silicon Valley => Shanghai
    Posts
    113
    Helped
    10 / 10
    Points
    2,111
    Level
    10

    flexlm firewall ports

    The port may be taken by other daemons



  5. #5
    Full Member level 3
    Points: 2,957, Level: 12
    Shurik's Avatar
    Join Date
    Jul 2004
    Posts
    167
    Helped
    16 / 16
    Points
    2,957
    Level
    12

    (lmgrd) failed to open any default tcp port

    Hi!!!

    next line is necessary in license file:
    SERVER <Name of server>
    You may to write IP address !

    name of server is necessary to write in /etc/hosts.

    Best regards



  6. #6
    Member level 3
    Points: 1,970, Level: 10

    Join Date
    Apr 2004
    Location
    China,SuZhou
    Posts
    58
    Helped
    8 / 8
    Points
    1,970
    Level
    10

    lmgrd failed to open any default tcp port

    if you use the default 27000,it will use from 27001-27009.

    You can see your current port be used by:
    nmap -sT 127.0.0.1



  7. #7
    Full Member level 4
    Points: 2,893, Level: 12

    Join Date
    Mar 2004
    Posts
    221
    Helped
    5 / 5
    Points
    2,893
    Level
    12

    failed to open any default tcp port

    Maybe you start 2 or more licenses on one port.



  8. #8
    Junior Member level 2
    Points: 1,425, Level: 8

    Join Date
    May 2006
    Posts
    24
    Helped
    0 / 0
    Points
    1,425
    Level
    8

    failed to open tcp port

    Quote Originally Posted by edacw1
    Maybe you start 2 or more licenses on one port.
    I just want to say so~



  9. #9
    Member level 3
    Points: 2,097, Level: 10
    yellff's Avatar
    Join Date
    Apr 2003
    Posts
    58
    Helped
    3 / 3
    Points
    2,097
    Level
    10

    failed to change flexlm license server

    The port can be change.



  10. #10
    Newbie level 2
    Points: 976, Level: 7

    Join Date
    Jul 2007
    Posts
    2
    Helped
    2 / 2
    Points
    976
    Level
    7

    failed to open the tcp port number

    How to edit lmgrd's version?
    Thanks


    2 members found this post helpful.

    •   Alt20th August 2007, 15:39

      advertising

        
       

  11. #11
    Newbie level 2
    Points: 922, Level: 6
    lcbrevard's Avatar
    Join Date
    Oct 2007
    Location
    San Jose, CA
    Posts
    2
    Helped
    0 / 0
    Points
    922
    Level
    6

    failed to open tcp port number

    I just had this problem and FINALLY discovered that if /etc/hosts is missing the

    127.0.0.1 localhost

    line, it causes this same symptom even when EVERYTHING else is OK.

    The previous person administering the system had removed the localhost line for who-knows-what reason!

    OS: CentOS 3.9 (Red Hat Entterprise Linux v3) clone. 32-bit x86 2.4 kernel

    SW: Synopsys lmgrd and snpslmd version 10.9.2 (based on lmgrd 10.8.5).

    License: Synopsys Milkyway MAP-in program

    LCBrevard
    San Jose, CA
    http://brevardandbrevard.com



  12. #12
    Advanced Member level 4
    Points: 10,538, Level: 24
    omara007's Avatar
    Join Date
    Jan 2003
    Location
    Dubai
    Posts
    1,232
    Helped
    53 / 53
    Points
    10,538
    Level
    24

    flexlm default port

    Quote Originally Posted by edacw1
    Maybe you start 2 or more licenses on one port.
    How to know if 2 or more licenses are up on the same port ??



  13. #13
    Junior Member level 2
    Points: 2,091, Level: 10

    Join Date
    Apr 2002
    Posts
    23
    Helped
    1 / 1
    Points
    2,091
    Level
    10

    failed to open any default tcp port.

    you can use lmstat to check the status of runing dameon.

    and please check the license file, you should see following fomat:
    SERVER hostname hostid port_number
    DAEMON daemon_name path_to_daemon_exe
    # DO NOT REMOVE THE USE_SERVER LINE
    USE_SERVER

    you can change the port_number and restart the license server use following command:
    lmgrd -c you_lic_file -l log_file

    then check the log_file for detail

    Hope this will help you.
    Thanks!



  14. #14
    Advanced Member level 4
    Points: 10,538, Level: 24
    omara007's Avatar
    Join Date
    Jan 2003
    Location
    Dubai
    Posts
    1,232
    Helped
    53 / 53
    Points
    10,538
    Level
    24

    flexlm failed to open any default tcp port

    Quote Originally Posted by lovelyic
    you can use lmstat to check the status of runing dameon.

    and please check the license file, you should see following fomat:
    SERVER hostname hostid port_number
    DAEMON daemon_name path_to_daemon_exe
    # DO NOT REMOVE THE USE_SERVER LINE
    USE_SERVER

    you can change the port_number and restart the license server use following command:
    lmgrd -c you_lic_file -l log_file

    then check the log_file for detail

    Hope this will help you.
    Thanks!

    I indeed did that, and when running the lmgrd on the license I got this log file:




    Erased !!! - You have been warned for posting illegal info
    ---------------- TOPIC LOCKED !!! ------------------
    .






    I tried then running the dc_shell-t, and I got the following error :

    Code:
    Fatal: Design Compiler is not enabled. (DCSH-1)
    I have no idea where is the origin of the problem !! .. the log file looks normal to me except that the last couple of lines with (snmslmd) do have different time stamp that the previous (lmgrd) lines !! ...

    Any explaination to what is happening ?



  15. #15
    Junior Member level 2
    Points: 2,091, Level: 10

    Join Date
    Apr 2002
    Posts
    23
    Helped
    1 / 1
    Points
    2,091
    Level
    10

    flexlm port number

    please set following environment variable before run dc shell, below is the bash sample:
    Code:
    export LM_LICENSE_FILE=27000@localhost.localdomain 
    export SNPSLMD_LICENSE_FILE=27000@localhost.localdomain
    where localhost.localdomain is you hostname

    please replace the "(at)" with "@"



  16. #16
    Advanced Member level 4
    Points: 10,538, Level: 24
    omara007's Avatar
    Join Date
    Jan 2003
    Location
    Dubai
    Posts
    1,232
    Helped
    53 / 53
    Points
    10,538
    Level
    24

    default flexlm port

    Quote Originally Posted by lovelyic
    please set following environment variable before run dc shell, below is the bash sample:
    Code:
    export LM_LICENSE_FILE=27000(at)localhost.localdomain 
    export SNPSLMD_LICENSE_FILE=27000(at)localhost.localdomain
    where localhost.localdomain is you hostname

    please replace the "(at)" with "@"
    This (at) in my code block is not originally in the file .. this is due to edabaord restriction ..
    For example :

    xyz@123.com is written like the normal email format .. but I believe it will be shown like this : (at) ..



  17. #17
    Member level 1
    Points: 1,457, Level: 8

    Join Date
    Apr 2006
    Posts
    40
    Helped
    5 / 5
    Points
    1,457
    Level
    8

    lmgrd failed to open the tcp port number

    first of all don't run lmgrd with as a root..........check whether you ethernet card is active.........then check for ifconfig which display your ip ....check hostname and mac id in your licenses..........let me know for further ..........



  18. #18
    Advanced Member level 4
    Points: 10,538, Level: 24
    omara007's Avatar
    Join Date
    Jan 2003
    Location
    Dubai
    Posts
    1,232
    Helped
    53 / 53
    Points
    10,538
    Level
    24

    failed to open tcp port in license

    Quote Originally Posted by jonnajagadeesh
    first of all don't run lmgrd with as a root..........check whether you ethernet card is active.........then check for ifconfig which display your ip ....check hostname and mac id in your licenses..........let me know for further ..........
    so, what's after checking all these things ? .. just checking ??



  19. #19
    Advanced Member level 4
    Points: 10,538, Level: 24
    omara007's Avatar
    Join Date
    Jan 2003
    Location
    Dubai
    Posts
    1,232
    Helped
    53 / 53
    Points
    10,538
    Level
    24

    lmgrd port

    I'm now getting this new error :


    Code:
     3:58:50 (snpslmd) Error - lmgrd refused vendor name list.
    This daemon will only serve licenses for the primary vendor.
    Given that I have another version of FlexLM installed on my machine because I installed Cadence long ago before I try to install Synopsys .. and the older FlexLM doesn't work with Synopsys so I had to install a newer version ..


    Any clue to solving this problem ?



  20. #20
    Advanced Member level 1
    Points: 5,152, Level: 17

    Join Date
    Jul 2004
    Location
    India
    Posts
    418
    Helped
    28 / 28
    Points
    5,152
    Level
    17

    lmgrd failed to open tcp port

    Hi Omara007,
    I am not any problem with PT. But problem comes only in DC. Did you fix this problem?



+ Post New Thread
Please login
Page 1 of 2 12 LastLast