hock
Advanced Member level 2
triaxial hock
i want to simulate a cable using CST Studio 2006.
the cable is a tri-axial cable with following specifications
Inner Conductor Core ID=0.00 mm Dia OD=0.40 mm Dia Material Cu
Inner Conductor CLAD ID=0.40 mm Dia OD=0.50 mm Dia Material SS
First Insulator layer ID=0.50 mm Dia OD=2.66 mm Dia Material MgO(>96% pure)
Inner sheath Core ID=2.66 mm Dia OD=3.08 mm Dia Material Cu
Inner sheath Conductor CLAD ID=3.08 mm Dia OD=3.48 mm Dia Material SS
Second Insulator layer ID=3.48 mm Dia OD=4.56 mm Dia Material MgO(>96% pure)
Final Conductor CLAD ID=4.56 mm Dia OD=6.00 mm Dia Material SS
the minimum length of cable to be simulated is 100mm.
i need to calculate signal Distortion and attenuation for a 60ns gaussion pulse between inner and Inner sheath, outer conductor is grounded.
how can i do this?
how can i minimise the mash points.
the cst project is attached, please advise. thanks
hock
i want to simulate a cable using CST Studio 2006.
the cable is a tri-axial cable with following specifications
Inner Conductor Core ID=0.00 mm Dia OD=0.40 mm Dia Material Cu
Inner Conductor CLAD ID=0.40 mm Dia OD=0.50 mm Dia Material SS
First Insulator layer ID=0.50 mm Dia OD=2.66 mm Dia Material MgO(>96% pure)
Inner sheath Core ID=2.66 mm Dia OD=3.08 mm Dia Material Cu
Inner sheath Conductor CLAD ID=3.08 mm Dia OD=3.48 mm Dia Material SS
Second Insulator layer ID=3.48 mm Dia OD=4.56 mm Dia Material MgO(>96% pure)
Final Conductor CLAD ID=4.56 mm Dia OD=6.00 mm Dia Material SS
the minimum length of cable to be simulated is 100mm.
i need to calculate signal Distortion and attenuation for a 60ns gaussion pulse between inner and Inner sheath, outer conductor is grounded.
how can i do this?
how can i minimise the mash points.
the cst project is attached, please advise. thanks
hock