Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to define a line in CST MWS model?

Status
Not open for further replies.
E

elektr0

Full Member level 5
Joined
May 2, 2006
Messages
279
Helped
2
Reputation
4
Reaction score
3
Trophy points
1,298
Activity points
3,374
CST _ defining curve

Hallo,

i want to define a line in my CST MWS model, for calculating the
integral of E along a line afterwards.

Defining lines is only possible in the xy-area, whats wrong ?
 

CST _ defining curve

use the 'local coordinates' , a UVW coordinate, and rotate it around one axis. Draw the line in the UV plane.

Or you can use 3D polygon to draw a line .
 
Re: CST _ defining curve

the other way to define a 3D line is use command 3D polygon
 

CST _ defining curve

it seems that in the macro there are 2D curve and 3D cureve creation!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top