Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

DC motor control using PIC

Status
Not open for further replies.
I

impakt

Member level 4
Joined
Dec 19, 2005
Messages
68
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
1,799
irf540 dc motor

I would like some documentaion about H bridge or some other possibiities to drive 2 DC motors., and how can I realize how the motors are controlled by a PIC16F877, given the scheme? Thank you!
 

irf540 bridge dc motor

hi

does anybody know the c source code of PIC program on how to control the motor using H bridge? the PIC i'll be using is PIC 16f84A
tq.
 

motor control irf 540 circuit

Checkout Microchip for application notes and sample code on motor control using pic. They have a large section dedicated to it.
 

irf540 dc모터

You can drive DC motor by four transistor or speacial motor driving chips.
 

hc11 pwm motor control source code for proteus

Yes, using IRF540 for power module, Speed of DC motor can control by PWM. Simple circuit: One IRF540 with 3 contact Relay and a feedback module like encoder, you can control speed, direction...
See on www.Freescale.com, they have some good H brigde IC up to 20A.

Added after 8 minutes:

If you want schematic, send email to me, i 'll reply to you
 

bistepper control

Theres a couple of samples in the Proteus ..\samples directories that may help.

In particular, a PWM controlled motor controller using a darlington bridge driver (albeit with an HC11) and others for Bistepper and Servo motors.

Iain.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top