gravi
Full Member level 2
- Joined
- May 30, 2006
- Messages
- 128
- Helped
- 10
- Reputation
- 20
- Reaction score
- 10
- Trophy points
- 1,298
- Location
- Hyderabad, India
- Activity points
- 2,452
sim300c site:www.edaboard.com
Hi Everybody,
This is Ravi Worked previously with SIM100S and every was fine but now Im trying to work with SIM300 ver 2.04 I was able to power on the Modem using Power key and able check with AT Commands fine, My problem is Modem is not detecting SIM card (SIM VDD=0 which should be 1.8 to 3.0V).I was not able to receive RDY after Power ON but I found EXT vdd as 3.2V only after I Power on using Power Key , even I have given
AT+CSDT=1
Do I need make Software commands other than AT+CSDT=1.
Thanking you,
Ravi
Hi Everybody,
This is Ravi Worked previously with SIM100S and every was fine but now Im trying to work with SIM300 ver 2.04 I was able to power on the Modem using Power key and able check with AT Commands fine, My problem is Modem is not detecting SIM card (SIM VDD=0 which should be 1.8 to 3.0V).I was not able to receive RDY after Power ON but I found EXT vdd as 3.2V only after I Power on using Power Key , even I have given
AT+CSDT=1
Do I need make Software commands other than AT+CSDT=1.
Thanking you,
Ravi