---
+ Post New Thread
Results 1 to 4 of 4
  1. #1
    Newbie level 4
    Points: 1,196, Level: 7

    Join Date
    May 2006
    Posts
    5
    Helped
    0 / 0
    Points
    1,196
    Level
    7

    50,000 volt fish zapper design

    I have three 12 volt ignition coils that produce about 15,000 volts each, and I wired the outputs together, and and I turn them on using a relay activated by 12 volts.
    I need to pulse the 12 volt lead in at about 5 - 15 hz. I know nothing about electronics, other than very basics (like hz means cycles per second). The lead in voltage is provided through a relay, that is activated by a sensor.]
    The whole idea of this thing is to use it as a fish shocker. Anode and cathode sitting on the surface of the water about 10 feet apart, zapping everything that swims by.

    Any help really appreciated, and will keep you updated on my progress right here

    MOD: Do not post or exchange any projects which are destructive in nature. This thread is locked. Next time i see any such requests or posts, the OP as well other memebers supporting it will be banned.

    •   Alt17th May 2006, 03:06

      advertising

        
       

  2. #2
    Newbie level 5
    Points: 1,274, Level: 8

    Join Date
    May 2006
    Location
    ZA, GP
    Posts
    9
    Helped
    0 / 0
    Points
    1,274
    Level
    8

    homemade fish shocker

    Building High Volatge (HV) devices are extremely dangerous, if you do not keep
    to the regulations. In most coutries it is totally against the law to build your
    own home-made HV generators.
    There are many web sites that does give fully functional circuits, but even on
    these sites you will get the same warnings.



    •   Alt26th May 2006, 12:05

      advertising

        
       

  3. #3
    Junior Member level 1
    Points: 1,247, Level: 7

    Join Date
    May 2006
    Posts
    15
    Helped
    0 / 0
    Points
    1,247
    Level
    7

    fish shocker

    Hi,
    Please don't do that! You'll kill all fishes from very litle one. This way you'll destroy all aqua reserves in you pool, river or whatever there. Please, be kind enough don't do and don't help the others to do that.
    Thanks on behalf of litle fishes not killed!



    •   Alt21st June 2006, 10:53

      advertising

        
       

  4. #4
    Newbie level 1
    Points: 484, Level: 4

    Join Date
    Mar 2010
    Location
    philippines
    Posts
    1
    Helped
    0 / 0
    Points
    484
    Level
    4

    50,000 volt fish zapper design

    KDunross
    please give a diagram of a fish zapper.
    MOD: Do not post or exchange any projects which are destructive in nature. This thread is locked. Next time i see any such requests or posts, the OP as well other memebers supporting it will be banned.



+ Post New Thread
Please login