Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

STH51004 laser diode Spice model from OrCAD 10 library

Status
Not open for further replies.

radiohead

Advanced Member level 1
Joined
May 13, 2004
Messages
447
Helped
66
Reputation
128
Reaction score
31
Trophy points
1,308
Location
Heart of Europe
Activity points
3,562
Hey folks,

I need a favour of one of you who has ORCAD. I would like to obtain a spice model from the infineon STH51004 laser diode. It is included in the ORCAD 10.0 pspice library, but only the professional edition contains this model. Thanks for the efforts!

I
 

Re: ORCAD spice model

here is your model

.SUBCKT STH51004 PDC PDA LDC LDA OP
* STH51004 from Siemens * I-Team@Nikkel 12/27/00
Dld LDA I dlaser
Vid I LDC
Eop op 0 TABLE {if(I(Vid)<10m,(9.99E-03*I(Vid)+5.57774E-08),
+ (2.00E-01*I(Vid)-0.002000479))}(0,0)(100,100)
Rdummy op 0 1k
Gopd PDC PDA TABLE {V(op)} (0,0) (0.5m,550u)
Dpd PDA PDC pdetec
.model dlaser D IS=300.25E-9 N=3.5824 RS=3.10024 IKF=7.8269 ISR=100.00E-12 BV=2 IBV=10u
*EG=2.8 XTI=3
.model pdetec D CJO=5p BV=10 IBV=10u ISR=4.0E-10
.ends
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top