Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Temperature Coefficient : PSPICE

Status
Not open for further replies.
V

vbhupendra

Full Member level 4
Joined
May 11, 2005
Messages
235
Helped
15
Reputation
30
Reaction score
10
Trophy points
1,298
Location
GOA, INDIA
Activity points
3,219
temperature resistor pspice

how to define TC of resistors in PSPICE ?
 

how to add temperature coefficient in pspice

Hi,

I think if you double click the resistor you can open up its attribute box. This is were you can edit them. Just change TC too whatever you want.

Hope that helped

david119
 

spice resistor temperature coeff

There is no attribute named TC ?
 

Hi vbhupendra,

There are two different types of resistors that you can lay down. The first is the general resistors that look like R1, R2, ect. and they all have 1K values(which can be changed). These are the ones that I thought could be double clicked on.

The second kind of resistors are labeled Rbreak. If your trying to use this type I would try just selecting the resistor and then select EDIT then MODEL from schematic menus.

Hope that helps

david119
 

you can try hand edit the netlist file, add the tc=0.00xx at the end of the resister description line, that might work if PSPICE support that parameter.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top