Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CST data export: can I get it as real and imaginary parts?

Status
Not open for further replies.
T

tyassin

Advanced Member level 1
Joined
Jul 22, 2004
Messages
467
Helped
86
Reputation
170
Reaction score
41
Trophy points
1,308
Activity points
3,804
cst export plot

Hi

I would like to export the data from a antenne simulation. If I choose to plot the directivity, the data is only in dB:

phi(angle) | theta(angle) | abs | theta_dB | phi_dB | Left pol. | Right pol.

I have tried to illustrate the data export above.

My question is is it possible to get the data as real and imaginary parts or magnitude and angle. I should mention that I am not very familiar with CST. If someone knows another setup so this is possible, would be very appriciated.

Thanks
 

Re: CST data export

Hello Tyassin,

you already have mag and angle in your export. E.g. your phi/Theta is you varying angle and theta/Phi_dB arey our magnitude. Open it in excel and delete the col that you don't need. If you do not want in in dB, you can go to plot properties and change the scale to linear.

Hope this is want you require.

Element7k

tyassin said:
Hi

I would like to export the data from a antenne simulation. If I choose to plot the directivity, the data is only in dB:

phi(angle) | theta(angle) | abs | theta_dB | phi_dB | Left pol. | Right pol.

I have tried to illustrate the data export above.

My question is is it possible to get the data as real and imaginary parts or magnitude and angle. I should mention that I am not very familiar with CST. If someone knows another setup so this is possible, would be very appriciated.

Thanks
Click to expand...
 

Re: CST data export

Hello Tyassin,

you already have mag and angle in your export. E.g. your phi/Theta is you varying angle and theta/Phi_dB arey our magnitude. Open it in excel and delete the col that you don't need. If you do not want in in dB, you can go to plot properties and change the scale to linear.

Hope this is want you require.

Element7k

tyassin said:
Hi

I would like to export the data from a antenne simulation. If I choose to plot the directivity, the data is only in dB:

phi(angle) | theta(angle) | abs | theta_dB | phi_dB | Left pol. | Right pol.

I have tried to illustrate the data export above.

My question is is it possible to get the data as real and imaginary parts or magnitude and angle. I should mention that I am not very familiar with CST. If someone knows another setup so this is possible, would be very appriciated.

Thanks
Click to expand...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top