Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Cadence Error message! Help please!

Status
Not open for further replies.

Analogworld

Member level 1
Joined
Mar 9, 2006
Messages
36
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,749
When I start running Cadence in linux FC4, it shows the following error message in the console:

Loading "/Cadence/IC5033/tools.lnx86/lib/libgdmtdm_sh.so" has failed.
Error (dlopen): /Cadence/IC5033/tools/lib/libvirtuos_sh.so: cannot restore segment prot after reloc: Permission denied
Error (gdmiLoadDMLibrary): Could not load library './libgdmtdm_sh.so' for DM system 'tdm'
Error (gdmImportDMSystem): DM system 'tdm' as specified in file '' is
not available due to errors.

***** error message from the CDS log box
/Cadence/IC5033/tools/dfII/bin/32bit/libManager.exe: error while loading
shared libraries: /Cadence/IC5033/tools/lib/libvirtuos_sh.so: cannot
restore segment prot after reloc: Permission denied

Error (gdmLoadSharedLib): Loading
"/Cadence/IC5033/tools.lnx86/lib/libgdmtdm_sh.so" has failed.

Error (dlopen): /Cadence/IC5033/tools/lib/libvirtuos_sh.so: cannot
restore segment prot after reloc: Permission denied

Error (gdmiLoadDMLibrary): Could not load library './libgdmtdm_sh.so'
for DM system 'tdm'

Error (gdmImportDMSystem): DM system 'tdm' as specified in file '' is
not available due to errors.


Is that a setup problem on the environment .bashrc file? How do I fix this problem? Any help would be greatly appreciated!
 

are you sure that Cadence work under Fedora 4 ? why do`nt you use RH 8 or SUSE 9.0 ?
 

Thanks for the note. I am pretty sure it work on Fedora 4. I seen people using it on this platform.
 

I met the same error when I run ic5141 on fedora4 , anybody kown how to solve this problem?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top