Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

A quesion about PSRR of OPAMP

Status
Not open for further replies.

holddreams

Full Member level 6
Joined
Aug 2, 2005
Messages
351
Helped
15
Reputation
30
Reaction score
7
Trophy points
1,298
Location
Shanghai
Activity points
4,237
When plot the PSRR+, the phase plot will decreases from 0 some negative degree,

So, if the phase plot decreases from about -180 degree, How to explain this?

Thanks.
 

I think, the reason is that you place the input ac voltage source on no-invert input of opamp to get phase decrease from 0.
you can get phase decrease from 180/-180 if you place the input ac voltage source on invert input of opamp.

Added after 8 minutes:

Sorry, what I say is for the case that ac source is placed input of opamp.
The question what you say maybe the same reason. It is only because ac source direction.
I suggest you release in analog ic design board. There are many experienced people who work in analog area.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top