Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CMOS level shifter for changing a square wave from 0-1.8v to 1.8-3.6v

Status
Not open for further replies.
G

gtmbht

Newbie level 3
Joined
Feb 3, 2006
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,307
Hello,

I would like to shift a square wave operating between 0-1.8v to one operating between 1.8-3.6V. I tried using a conventional level shifter (domino like circuit). Unofrtunately it only shifts the upper level and not the lower , i.e., the wave output is between 0-3.6V and not 1.8-3.6V (desired). Please help me with this issue

Thanks
Gautam
 

CMOS level shifter

you can shift 0-3.6 to 1.8 -3.6
 

    G

    gtmbht

    Points: 2
    Helpful Answer Positive Rating
Re: CMOS level shifter

I apologize, maybe I am taking too much time to understand something trivial, but how would I shift 0-3.6 to 1.8-3.6?

thanks

gautam
 

Re: CMOS level shifter

0-3.6V can be converted to 1.8-3.6V with a resistor and 1.8V zener diode .. see picture below ..

Regards,
IanP
 

CMOS level shifter

Hi,

You can shift a pulse waveform from 0-1.8 to 1.8-3.6 using a simple RC circuit. consider the following circuit netlist:

C in out Cvalue
R out dd Rvalue
Vdd dd 0 1.8

Cvalue and Rvalue depends on the frequency of operation.
 

Re: CMOS level shifter

I tried implementing the same level shifter on 0-3.6 square wave .... with vdd=3.6 and vss=1.8 this time...and guess what?? it works!!....thanks a lot for your ideas ...really appreciate the help.


Gautam
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top