Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

I need model of MOSFET 2SJ162 and 2SK1058

Status
Not open for further replies.
valajor

valajor

Newbie level 6
Joined
Jun 14, 2004
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Lima - Peru
Activity points
74
2sk1058 mosfet

Hi

I'm working with MultiSIM 8 to design an Amplifier, but I need 2SJ162 and 2SK1058 MOSFET's, I found this link **broken link removed**
but when I created these components and simulated the circuit I had an error.
I thought that these models are wrong.

I hope you can help me.

Thx.

PD. Sorry but my English isn't very well.

Jorge Valerio
Lima-Peru
 

2sk1058 model

You never said what kind of errors you were getting. The type of error might give a hint about if the problem is with the circuit, the model or the simulation settings.

Here are the models for the NMOS and PMOS transistors that you requested.

.MODEL 2SK1058 NMOS (VTO=403.969M KP=20U L=2U W=29.7482M GAMMA=0 PHI=600M LAMBDA=184.988F RD=60.8251M CBD=2.56138N IS=10F CGSO=1.13517N CGDO=1.13517N TOX=0 NSUB=0 TPG=1 UO=600 RG=50 RDS=1MEG )

.MODEL 2SJ162 PMOS (VTO=842.193M KP=20U L=2U W=21.3317M GAMMA=0 PHI=600M LAMBDA=20.7067M RD=837.199M CBD=2.96862N IS=10F CGSO=1.13517N CGDO=1.13517N TOX=0 NSUB=0 TPG=1 UO=600 RG=50 RDS=1MEG )

Best regards,
v_c
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top