Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Why do I get ID error while burning PIC16f628A?

Status
Not open for further replies.
G

gonewiththewind

Newbie level 4
Joined
Jun 21, 2005
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,320
hi hi!
I'm still a new baby. I'd like to know why ID error on burning PIC16F628a.Pls do me a favour.
 

Re: pic16f628a

change chip try again.if it doesn't solve problem it may be problem with programmer and don't forget turn off lvp and try16f628 not 628a one
 

Re: pic16f628a

Hi gonewiththewind,

Please be more specific about your problem. Try to include the following:

What programmer do you use? Is it DIY or a purchased one?
What software to you use to program the micro?
What software to you use to compile?

ALthough micro's can generally be programmed quite easily, there a many things that can go wrong, voltages, bad connections, software problems.etc...

BuriedCode.
 

Re: pic16f628a

First read complete documentation of ur programmer and then check the datasheet of ur micro-controller.As a last resort change the microcontroller and see what happens.......
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top