Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help on Allegro (how to assign a net name to a copper area)

Status
Not open for further replies.
B

bingjiang99

Advanced Member level 4
Joined
Apr 27, 2005
Messages
115
Helped
5
Reputation
10
Reaction score
0
Trophy points
1,296
Activity points
2,303
cadence allegro net names

Dear fellows,

I am new to Cadence Allegro (ver. 15.5). I have a headache problem with it. I am designing a two layer board (top and bottom). I am trying to put a piece of metal area on the bottom (ground), and I want to connect it to my input ground. I know I have to assign a net name to it. However, I can't find a way to do it.

Actually, I found a tutorial, which showed that I can do Edit > Change Net. However, I can't find such a menu in my windows.

I also attached my file here. If you have any suggestions, please let me know. I really appreciate your great help.

Thank you,
 

allegro assign net

Hi
Select your shape then right click and select Assign net either type your net name or pick a net with cursor.

Regards,

Majnoon
 
allegro+change+net+name

Thank you, Magnoo. I figured it out. I have to start with a schematics to have a netlist in the PCB editor. I can't create a net within the PCB editor directly, although the help document shows I should be able to do it. Maybe it can be done with the more advanced version.
 

allegronet logic

Hi bingjiang99

Sure you can.

Go to logic<net logic

And follow instructions.
But the best way is to fix it in schematic.

Regards,

Majnoon
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top