Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

antenna design(HFSS)-added resistor

Status
Not open for further replies.
S

spide

Member level 3
Joined
Nov 29, 2004
Messages
61
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
412
in my antenna design, if i add some resistor in between my antenna.then how simulate using HFSS?
 

you can drwa a rectangular, then assign the its boundary to impendance boundary.That's a thin film resistor.
 

u mean i should draw actual size of the SMD resistor n assign the impedance boundary?
 

burton said:
you can drwa a rectangular, then assign the its boundary to impendance boundary.That's a thin film resistor.
Click to expand...
Dear burton :
can you explain it in some details ? it will be better if there is a .hfss file as an example .
thanks
 

wat about using ansoft designer to implement impedance boundary?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top