Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Vxworks5.5 for MCB2100 with LPC2129 as the core

Status
Not open for further replies.
A

abid_ms

Junior Member level 3
Joined
Oct 12, 2005
Messages
31
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,653
vxworks + lpc2129

Hi,
I am working with Vxworks 5.5 and it has BSP support for ARM 4 and 5. Can any body help me in running any application program on MCB2100 board with LPC2129 (ARM 7) as the core. Do I need to install a saparate BSP for this board. If so, help me the way to get this BSP. Thanks in advance.
[/b]
 

lpc2129 + vxworks

i holp this will help for you
 

WindRiver does NOT supply the BSP for LPC2104, but it supply the arm7 BSP template, you can port the template to LPC2104. After you installed the Tornado for ARM, you will see the template in the \target\config\ directory. Good Luck!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top