Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Smart Card Programmer

Status
Not open for further replies.
W

wmyatthu

Junior Member level 3
Joined
May 14, 2005
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,514
Hi Seniors,
I want to bulid a smart card programmer myself that supports AT90S**** and ATMega**. So please give me advice how to get the resources. Thanks in advance.

Your junior,
Win Myat Thu.:|
 

You can use FT232 or FT245 in bitbang mode. In this mode you can control from PC side, each pin, individually. In the PC application (VB, what you preffer), you will have to write the programming protocol. It is not the fastest way, the programming may take a time, but it is one of the cheapest.

/pisoiu
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top