Thread: Software for programing PLC's

Here is software for making ladder diagrams and program PLC.


Mr.Cube

Much better software download c_x-programmer from
h**p://www.fe.up.pt/~apmag/ci_lem/software.htm
Use file attached for full version

Where is the simulator for CX-programmer ?

Monty

I have full CX-programmer but its too big to post it to elektroda.

Simulator works only when PLC is connected to PC via serial port.


Regards.

Mr.Cube

Originally Posted by mrcube_ns

I have full CX-programmer but its too big to post it to elektroda.

Simulator works only when PLC is connected to PC via serial port.


Regards.

Mr.Cube

LOL, what's the use of the simulator then if you need a real PLC

Monty

When you have PLC you can connect to them from CX-programmer so you can run program (Ladder diagram), so if you turn some output on in ladder, this output will become high on PLC. So, you can realy debbug your program in a real conditions. It's realy works fine.

I have plenty of software for Omron products, but untill now I dont see simulator which works without PLC. Maybe, it exists.

Maybe I can ask Gulson how to upload CX Programmer (its about 350MB).

Best regards.

Mr.Cube

PLC simulators emulate a plc on a PC, so you can test your program in a virtual PLC in the original programming software.
All great plc brands have one:
Siemens : PLCSIM
Allan Bradley : RSEMULATE
Modicon : Integrated in CONCEPT

Monty

I know what is simulator, but Omron don;t have it.

Mr.Cube

I have CX-Programmer and simulator software called "Symulator CPM1" (polish program :P) so I don't need to have a real PLC :) If you want these programs send an e-mail to me (marcin_ksiazek@o2.pl). "Symulator.." is only in polish version but it represents CPM1 so it won't be to hard to use it :). All we nedd is a serial cable to connect COM1 to COM2. If someone ask me I explain it better. GL&HF

well, i'm interested in a "real" PLC simulator which can be used with CX programmer. How big is "Symulator CPM1" ?

I hope it's a bit good for a non polish speaker

my mail and msn : monty_burns_007@hotmail.com

thx,

Monty

Are you have PLC-MITSUBISHI simulator ?
i have it,but the program is german language. i can not use.

hi, look for logixpro on http://www.thelearningpit.com/lp/logixpro.html
no needed plc on serial port to simulate

hi all
i also want cx-programmer.
where can i get it
moghul

in need of cx programmer also.. =(

Originally Posted by ed1877

in need of cx programmer also.. =(

Omron CX-One 2.0

Code:

 3 RAR parts to 1 ZIP —> Total 10 ZIP parts
http://rapidshare.com/files/77920358...s_02_03_04.zip
http://rapidshare.com/files/77920125...s_05_06_07.zip
http://rapidshare.com/files/77920115...s_08_09_10.zip
http://rapidshare.com/files/77920196...ts_0_00_01.zip
http://rapidshare.com/files/77919808...s_11_12_13.zip
http://rapidshare.com/files/77919897...s_14_15_16.zip
http://rapidshare.com/files/77919862...s_17_18_19.zip
http://rapidshare.com/files/77919852...s_20_21_22.zip
http://rapidshare.com/files/77919625...s_23_24_25.zip
http://rapidshare.com/files/77917794...s_26_27_28.zip 

hey bro thx.. but i have problems getting downloads from rapidshare.. is there any other hostings which u can upload to and i able to download ??? in need for my school assignment which the dateline is coming.. =(

example: http://www.mediafire.com/
www.upload.com

Hello!

You will find what you need on www.plc.net.ru

Best regards!
Venix

Originally Posted by ed1877

hey bro thx.. but i have problems getting downloads from rapidshare.. is there any other hostings which u can upload to and i able to download ??? in need for my school assignment which the dateline is coming.. =(

example: http://www.mediafire.com/
www.upload.com

unfortunately, RS is the only website which can store these industrial programs without getting deleted by the OEM.