Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SONY KV-HR29 error: power LED is blinking 10 times

Status
Not open for further replies.
F

farrell

Newbie level 1
Joined
Sep 8, 2005
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
I have a Sony KV-HR29 and its power led blinking 10 times.
It has sound but no picture.

Never have any problems before.

Does anyone know what the 10 blinks code means ?
Is there anyone who knows or have same problem?
any suggestion to do ? or a proff technician is need it?

thanks in advance.[/b]
 

sony tv error code

there is two possible defects in your circuit.
However, if the led blinks for about 10 times your tuner is defective 90%.
To be sure if it is a tuner or an IF circuit. Isolate the tuner first then the IF circuit.
you can check this using a scope.

Thanks. I Hope this helps:D
 

sony led error code

Sony error code seems to change around chassis and features... It seems that your TV is newer than my model-chassis equivalents, thus chassis can't be identified. If you recognize chassis equipped by your TV, we can try to find the correct Service Manual and so the correct Blink-Code meaning.
Regards
Fulcro
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top