Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

I get a problem of this 0-30 Vdc Stabilized Power Supply

Status
Not open for further replies.
C

cyw1984

Member level 2
Joined
Sep 6, 2005
Messages
45
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,643
0-30 vdc stabilized power supply

I have couple of questions of this project.

How could it change the P1 and P2 to be Vref for D/A convertor 0-10V
and how to caculate the resistor????

Thanks a lot


**broken link removed**
 

You want to set the output voltage and current limit with DAC's?

For the volts remove P1 and feed a voltage into point 12 with the DAC ground to point 4.

The current limit is a bit more tricky.
 

throwaway18 said:
You want to set the output voltage and current limit with DAC's?

For the volts remove P1 and feed a voltage into point 12 with the DAC ground to point 4.

The current limit is a bit more tricky.
Click to expand...
sorry for my english
what mean of The current limit is a bit more tricky
how to replace DAC Verf I ????

Added after 23 minutes:

What type of this supply??
linear - LDO..NPN or Quais-LDO??
or Switching Rugulator??
 

hi
it is better to use LM723 regultors.
and it is easy to matche it whit adc.
 

HELP!!! I NEED A POWER SUPPLY WITH A regulated 12V and 9V OUTPUT.HOW CAN I DO THAT?


THANK YOU
 

Hi,
first of all i would like to say, "breneer ", it's not good idea to put your question in other people question area. but still, The Power supply u asked for is very simple for which i'm sending the diagram. Use the voltage regulators with Heat sinks. The MAX current is 1A.

Bye,

Take care next time.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top