Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Error Burning Platform Flash with ISE 7.1

Status
Not open for further replies.
A

andrepandi

Newbie level 4
Joined
Aug 18, 2005
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,336
xcf16p forum

In my design there is a Xilinx Virtex II FPGA and a XCF16p platform flash in the JTAG chain.

I can program the FPGA, but I can't burn the Flash with Impact 7.1.
I have tried sp1, sp2, sp3 for 7.1, but the problem persists.
Finally, I managed to program the Flash with 6.2sp3....

Has anyone experienced similar problems with Impact 7.1 ?
 

I can program an XCF01 with Impact 7.1 sp3 with no problem.
But I could believe that there is some sw error in the Impact, maybe you'd better wait for the next service pack. :|
 

    A

    andrepandi

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top