Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to convert the hspice_model into spectre_model?

Status
Not open for further replies.
Q

qqmz

Junior Member level 3
Joined
Nov 23, 2004
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
237
now ,i have the hspice model , but i want to use the spectre to simulate again,

how can i convert it into spcetre ?

thank you first!!
 

Cadence has a built-in SPICE reader. If you are using the Analog Environment, simply go to Setup-Environment and set the SPICE Netlist Reader option to yes. If you are using the command line, refer to the spectre user's guide. Hope that helps.
 

Dear qqmz,

There is a spp (SPICE Pre Parser) utility in Cadence environment. You also can invoke it from the console. The command I suppose is :

spp -convert - hspcompatible <spicefile> <spectrefile>

Try it and come back with the results.
 

thank you !!!

but , i have chosen the spice netlist in the ade envirment,

and i have run the spp -convert hspcompitible <><> in the console,

but it does not work still ,?why?
 

I have also proble with spp command :cry. I have described errors in this topic: . Has anyone answer or solution for this problem?
Thank you very much.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top