Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Hspice error statement

Status
Not open for further replies.
0

020170

Full Member level 4
Joined
Jan 31, 2005
Messages
231
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,298
Activity points
2,221
convergence in gmath hspice

**error** maximum entry in this column at step 34 (0.000000D+00)
is less than pivtol
no convergence with standard algorithm, trying damped pseudo-transient

*** initial damped pseudo transient completed. ***
*** final try started ***
**diagnostic** no convergence in the final try

no convergence in damped pseudo-transient, trying gmath ramping method


**error** maximum entry in this column at step 34 (0.000000D+00)
is less than pivtol

**diagnostic** no convergence in gmath method gmath= 0.00



**error** no convergence in operating point

_______________________________________________________

what is mean? I made just simple mos circuit using p & n mos.

thanks
 

convergence in gmath hspice

This is a convergence problem. Maybe you have some high impedance node in your circuit.
 

    0

    020170

    Points: 2
    Helpful Answer Positive Rating
just try .option gmindc=<value>
then se if it will converge
 

    0

    020170

    Points: 2
    Helpful Answer Positive Rating
Decrease gmindc is not a good mothod because it also decrease precision.
I usually use UIC for tran anaysis
 

    0

    020170

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top