Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

problem in connecting power pad to core ring in encounter

Status
Not open for further replies.

market

Newbie level 1
Joined
Jul 21, 2005
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,289
encounter power pad

Dear all,

When i try to connect the power pad pin to the core power ring in SOC encounter, i found that there is no connection generated. The pin assignment of the power pad is as follow (grap from IO LEF file):

pin A (for connecting to core power ring)
pin vdd3o!, vdd3r1!, vdd3r2! (for connecting pad ring)
pin gnd3o! gnd3r! (for connecting pad ring)

I have set the global nets connection as follow:

pin* vdd3o!:All
pin* vdd3r1!:All
pin* vdd3r2!:All
pin* gnd3o!:All
pin* gnd3r!:All

And the core power ring's power nets are vdd! and gnd!, which are the power pins' name of the std cells.

Do anyone know what is the problems?
Thank you very much for your help.

Best Regards,
Market
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top