Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How can I create an 'explosion' effect in an electronic circuit?

Status
Not open for further replies.
I

irfanhab

Member level 1
Joined
Aug 9, 2004
Messages
41
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
497
Hi,


How can I create an 'explosion' effect, in an electronic circuit? Soemthing like I press a button and it produces atleast something like a spark
 

Re: producing a spark

Hi

Its easy, use a automotive ignition coil, a MOSFET, and a 555 in mono-estavel configuration. search the web and you will find many circuits do do it.

Best regards
Pendragon
 

Re: producing a spark

that will be dangerous, don't have a try.

best regards



irfanhab said:
Hi,


How can I create an 'explosion' effect, in an electronic circuit? Soemthing like I press a button and it produces atleast something like a spark
Click to expand...
 

producing a spark

could u be a bit more clearer, I doint understand
 

Re: producing a spark

hi

Yes, this is dangerous. I dont know why you need to do that. Forget it.

Best regards
Pendragon
 

producing a spark

dont need to produce an explosion on an electronic circuit, but an explosion which can be controlled electronically, but carried in a 'mechanical device' (a mini-gun actually)
So I want a circuit in which an explosion can be setoff electronically.
 

Re: producing a spark

hi

Make a search on electromagnetic gun at google. You will find useful information.

But remember, this subject is very dangerous

Best regards
Pendragon
 

producing a spark

Why "Electromagnetic guns", isnt there any method in which I could produce a spark at a mechanical device which needs to be triggered electronically.
 

Re: producing a spark

you can use the same idea used in cars where voltage is chopped then fed to high tension coil to give high tensio to spark plugs.
 

Re: producing a spark

you can use a dc power supply to charge a capacitor to few 100 s of volts, use a teigger spark gap to trigger this capacitor and dump the energy in a coil. you have toy high voltage spark.
hock
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top