Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Tiny dual port RAM needed

Status
Not open for further replies.
D

Davor.S

Newbie level 6
Joined
Jul 25, 2002
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
29
tiny dual port ram

I am looking for a low capacity asynchronous dual port RAM.
Cypress and IDT devices are too big and expensive.
Is there anything smaller/cheaper? I need only 128 bits (16x8).

Best regards
 

maybe a fifo will work .. Otherwise is not too complicated to synthtiZe it with a CPLD
 

Hmm, a CPLD might end up bigger and more costly than the DPRAM, by the time you've added up all the storage and logic.

How about this from MAxim:

**broken link removed**
**broken link removed**

It's 256 Bytes, 24 pins, only glitch is address/data is mux'ed (still two seperate asynch ports though)

Cheers,
FoxyRick.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top