Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to use voltage source in HFSS?

Status
Not open for further replies.
T

tw20053010

Member level 1
Joined
Oct 24, 2004
Messages
33
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
293
hfss assign voltage

Dear Sir:

I want to use voltage source instead of wave port in HFSS. But I find if I set up the retangulars as the same as the wave port to be a voltage source, I cannot get the S-para results. May I just use valtage source to get the S-para in Driven Model?Could you help me?? Thank you very much!!!

Regards,

wei
 

What you need is a lumped port.
Draw a narrow rectangle and assign the lumped port.
You can get S parameter that way.

(Ansoft voltage source is different from HP-HFSS's, if that's what you used before. HP-HFSS's voltage source worked as you described.)
 

    T

    tw20053010

    Points: 2
    Helpful Answer Positive Rating
tw20053010 said:
Dear Sir:
May I just use valtage source to get the S-para in Driven Model?
Click to expand...
You can use Voltage Source, if you want to look at the EM-field pattern, only!
For S-parameters getting you need to use Lumped or Wave ports.
 

    T

    tw20053010

    Points: 2
    Helpful Answer Positive Rating
Thank you very much!!!!


Best regards,

Wei
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top