Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to define boundary layer number in Astro data prepare?

Status
Not open for further replies.
H

hgby2209

Full Member level 2
Joined
Mar 7, 2003
Messages
134
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,298
Activity points
1,105
.ram file astro

auStreamIn
formDefault "Stream In Data File"
setFormField "Stream In Data File" "Stream File Name" "abc.gds"
setFormField "Stream In Data File" "Library Name" "RAM"
setFormField "Stream In Data File" "Overwrite Existing Cells" "1"
setFormField "Stream In Data File" "Use Layer for Boundary" "1"
setFormField "Stream In Data File" "Boundary Layer" Layer_Number
setFormField "Stream In Data File" "Layer File" GDS_Layer_Map
formOK "Stream In Data File"

In Astro Data prepare, above script is streaming in GDS, but I dont know the boundary layer number and how to get GDS_Layer_Map file.
Could anyone tell me how to fix this problem? Thanks!!
 

astro map file

Hi,

You can check boundary number in GDSII file.
As for layer map file. I have a example as following list:

42 43;

42 is Astro technology file layer number for metal 1.
43 is gdsII file layer number for metal1.
You can use map file to convert GDSII file layer number to match technology file.

Best Regards,
Chyau
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top