Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Resources on "Feedback Amplifier analysis"

Status
Not open for further replies.
S

suprabhu

Newbie level 1
Joined
Aug 31, 2007
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
Dear all,

is there any method/procedure, to analyse the "feedback amplifiers", which is easier compared to method given in " Electronic Devices & Circuits" by Milman and Halkias.

Thanks in advance
sp3
 

This is a simple, straightforward, exact (as opposed to your textbook and other textbooks e.g. Gray and Mayer Analysis and Design of Analog integrated circuits, Sedra and Smith Microelectronic circuits, in which they assume the feedforward feedback path is negligible compared to the forward transconductance of the amplifier which is true for most applications but is a dangerous assumption and hence the expression you will found following those books mentioned is just an approximation of the exact one) , algorithmic method (i.e. just follow steps, not need to think much) in which you will not have to worry about the amplifier feedback topology.
https://people.eecs.berkeley.edu/~bora/publications/ISCAS98-Feedback.pdf

The exact expression can be found either with this method or with network analysis i.e. simple KCL, KVL equations.
 
Last edited:
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top