+ Post New Thread
Results 1 to 2 of 2
  1. #1
    Junior Member level 3
    Points: 197, Level: 2

    Join Date
    Oct 2016
    Posts
    28
    Helped
    0 / 0
    Points
    197
    Level
    2

    Designing aperature in hfss

    Hi, I would like to know how to assign an aperature in hfss.

    In the hfss help menu, they say 2. Select the object and right-click on Boundaries>Assign>Aperature to display the Aperature dialog.

    but, I don see the aperature option in my hfss version (version 13). So I would like to know if there is any other way to so it if I don't see it as an option inside Boundaries>Assign> ?

    or if you know what I did wrong?

    thank you

    •   Alt11th January 2017, 18:33

      advertising

        
       

  2. #2
    Full Member level 6
    Points: 3,492, Level: 13
    Achievements:
    7 years registered

    Join Date
    Sep 2008
    Location
    US
    Posts
    349
    Helped
    99 / 99
    Points
    3,492
    Level
    13

    Re: Designing aperature in hfss

    The Help menu Boundaries > Assign > Aperture that you are referring to is for HFSS-IE solver not for HFSS-FEM.

    To model aperture : Easier option would be to draw the object and use subtract operation



--[[ ]]--