Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[Moved] altium library 4-pin crystal oscillator

Status
Not open for further replies.

mohsen68sh

Junior Member level 1
Joined
Jun 10, 2016
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
129
hello
does anybody have altium footprint for 4pin crystal oscillators?
i made it myself but it does not work!!
thanks in advance
 

Re: altium library 4-pin crystal oscillator

there are different types of crystal oscillator
you should have its mechanical data including pad position and spacing or measure it yourself precisely
then design library component ,
you can print designed component with 1:1 scale and verify it before use.
 

Re: altium library 4-pin crystal oscillator

i already created a footprint for it, but it does not work!
altium sends "unknown pin error". i checked desinators and it seems to be ok.
i asked for a ready-to-use footprint because i am running out of time:thumbsdown:
 

Re: altium library 4-pin crystal oscillator

I think you made a mistake in pin assignment
attach your component schematic and pcb lib image to help you
 

Re: altium library 4-pin crystal oscillator

my component:
pcb.png
pin.png
pin2.png
sch].png

designed based on this
CXO5032T5-pinout.jpg
 

these seems true ,
do you assign your designed footprint to your schematic library correctly ?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top